How To Sync Roku Remote Without Pairing Button

By Max Anthony •  Updated: 11/15/22 •  6 min read

How To Sync Roku Remote Without Pairing Button

A Roku simple remote transmits button presses over a short distance using invisible infrared (IR) light. A simple remote must be aimed straight at the Roku device (it can control) and there has to be nothing in the way of the signal traveling to the front of that device for it to work reliably (where the IR receiver is located).

Tech Support 24/7
Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

Roku simple remote controls include the buttons, as well as channel quick access buttons that allow you to launch major streaming channels with a simple click.

Many Roku TV models and some broadcast players, such as the present generation Roku Express and Roku Premiere, come with a simple remote. The simple remote that comes with a Roku TV has all of the toggles seen on a player controller, as well as buttons to control the TV’s power and volume.

To use a simple remote, simply insert new matching fuel cells into the remote and point it toward the front of your Roku device.

Tech Support 24/7
Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

Your Roku Button Doesn’t Work

Although the pairing button on the Roku remote is safely tucked apart in the battery compartment, it can be damaged if the remote is destroyed as a result of leakage or dropping. Either of the preceding scenarios can yield the pairing button ineffective.

As a result, you will be unable to connect the controller to the Roku device via the button. You can, however, link the remote using the Roku controller app. The method is discussed further in the article.

As a workaround until you can successfully troubleshoot your Roku remote, you can stream video from your iPhone to your TV in seconds, or use Chromecast to cast material from other smartphones or laptops to your TV.

Replace Your Roku Remote

If your remote has been damaged by water or a drop and is no longer functioning properly, you could always replace it. It should be noted, however, that attempting to repair an old non-functioning device is always risky.

As a result, if your Roku controller is unstable, keeps unplugging, and the synchronization button is not operating, it is time to replace it. The Roku remote, unlike the Roku device, suffers from wear and tear as a result of rough handling. As a result, it will most likely fail before the Roku device.

Roku is constantly updating its controllers to add new features. Thus, purchasing a new controller will not only be a better choice, but you will also be able to experiment with new features.

Unpair Your Old Roku Remote

If you want to pair a bluetooth adapter or a controller from another Roku, you must first unpair the previous Roku remote. Otherwise, the recently paired controller will not work correctly. The pairing button is required to unpair the old remote. Take the following steps:

  1. Push the home, linking, and back buttons all at once.
  2. Continue to press until the LED light flickers three times.
  3. Wait a few moments. The remote will automatically unpair.
  4. If the pairing switch on the old remote no longer works, you can unpair it by trying to remove the batteries. Wait at least two minutes before replacing the batteries.

How To Sync Roku Remote Without Pairing Button

Pair Your New Roku Remote

To pair a Roku controller with a Roku device, the pairing button must be intact. Follow the instructions below to pair your new Roku remote with your Roku device.

  1. Turn on the television.
  2. Turn on the Roku player.
  3. Insert the batteries into the remote after the Roku logo appears.
  4. In the battery compartment, press the pairing button.
  5. Continue to press until the synchronization light begins to flash.
  6. The pairing process will be initiated automatically by the device. This could take some time.
  7. If the synchronization button on your Roku device is broken or damaged, you can pair it using the Roku controller app.

If your Roku Controller is not trying to match, reset it and check its batteries.

Pairing Button Is Not Working

Check to see if the pairing button on the remote is in a different location. If that fails, get an IR controller that is congruent with your Roku because it does not require pairing. The last options are to replace your remote and use the Roku controller app.

Have you received a substitute Roku remote? Or perhaps your Roku remote isn’t working properly and you’re stumped as to why?

There are three options, use the Roku app, power cycle the Roku device, or use the power button on your television.

Use The Roku App

The Roku device app is a one-stop shop that allows you to control your Roku account even if you don’t have a Roku remote. It also enables you to pair a Roku remote with the console if the pairing button on the remote is damaged.

Install the Roku app on your mobile device or tablet. It is accessible in both the App Store and the Google Play Store.

Make sure your tablet or mobile phone and the Roku gadget are on the same network.

  1. Launch the app.
  2. Navigate to the settings menu.
  3. Select ‘Remotes And Devices.’
  4. Select ‘Pair New Device.’

The Roku remote will be detected automatically by the app. If this method does not function for you, you can try another.

  1. Navigate to your Roku device’s settings using the knobs on the controller app’s home screen.
  2. Choose Remote out from the settings page.
  3. Select ‘Pair Remote.’
  4. Click the right arrow. This will launch a series of instructions.
  5. To link your controller to the Roku device, follow these steps.

If neither method works, your Roku remote may have a hardware malfunction. You may need to buy a new one.

Power Cycle The Roku Device

  1. To begin, unplug the Roku device from the electrical outlet.
  2. Remove the remote’s batteries.
  3. Reconnect the Roku device after 5 seconds.
  4. Replace the batteries in your remote once the Roku screen appears on your TV screen.
  5. The remote synchronization screen should appear, and the pairing procedure with your remote should begin automatically.

Use Button From Your TV

  1. On your Roku device, go to the Home Screen.
  2. Scroll down to find the ‘Settings’ alternative by using the knobs on your TV.
  3. Choose the ‘Remotes’ option.
  4. Select ‘Pair Remote.’
  5. At this point, the controller should immediately pair.

Replacement Remote For Roku

If you are unable to pair the Roku remote, you should return it and replace it with a new Roku voice controller or a suitable universal remote, such as the Logitech Harmony Hub, which encourages IR and Bluetooth innovation.

This is especially true if you have a Streaming Media Stick with HDMI input. A unified remote is also useful if you want to add more media controls to your Roku TV, which typically comes with an infrared remote.

(Visited 122 times, 1 visits today)

Max Anthony

Mainly Max Anthony is an athletics tutor & lives in Texas but that's not it. He's is also a music producer, content creator, record producer, writer, and session musician. He has been producing music and engineering at a lower level for over 5 years. His passions include quality music gear and that's what he loves to write about on HifiBeast. ( Shoot him an email now )

Keep Reading