Honeywell Thermostat Not Working After Battery Change

By Max Anthony •  Updated: 06/05/23 •  6 min read

Honeywell Thermostat Not Working After Battery Change

How do I reset my Honeywell thermostat after changing the batteries?

Honeywell thermostat technology is among the strongest and most respected on the market, but even the greatest technologies can be reset or repaired as needed. If you find that the thermostat in your house is off by a couple of degrees, it may be time for a reset.

Tech Support 24/7
Ask an Appliance Repairman Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

  1. Power off the thermostat and take out the batteries.
  2. Change the battery from being a dead battery to being one that is alive. If you do that, the system will be reset to factory settings.
  3. Then wait a few seconds, then insert the batteries in the proper way.
  4. Your temperature control system is now set to default settings.

Why is my thermostat blank after changing batteries?

To keep your home at a comfortable temperature, you must use a thermostat. However, thermostats frequently experience hardware or software issues, just like many other household appliances. A thermostat’s troubleshooting is not a difficult task. The diagnosis of the issue is the main challenge. Here are a few approaches.

  1. The thermostat’s wires must all be disconnected.
  2. Take the gadget out of the wall plate.
  3. Five minutes should pass after the batteries are removed.
  4. Both the batteries and the wires should be replaced.
  5. Wait five minutes after turning on the system.

Where is the reset button on a Honeywell thermostat?

Wi-Fi enabled thermostat lets you regulate the temperature and browse the web, allowing you to operate all the functions of a wireless thermostat. Before you can use the feature, make sure that you have created an account on the Honeywell website. If this is the device that you own, and you want to learn how to set it up again, try the steps below.

You can do a factory reset to allow your thermostat to return to its factory default setting.

Tech Support 24/7
Ask an Appliance Repairman Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

  1. Switch on your thermostat by turning it on and selecting the ‘Fan’ button.
  2. Press the Fan buttons while you press the Up Arrow key.
  3. After you are done with these steps, you should find a Disable button on your device. Now, push and keep pressing the Up arrow button for 5 to 10 seconds.
  4. Hold down the 4th button on your smartphone (it should be on the left) and while you hold it, the number on your phone should be 90.
  5. Continue pushing buttons until digit 1 becomes 1.
  6. Choose ‘Done’

Honeywell Thermostat Not Working After Battery Change

What happens if I push the reset button on my thermostat?

The thermostat will be turned off, and it usually returns the thermostat to its default settings. You should try using the reset button if your HVAC system is giving you trouble. You can always get help from an HVAC technician if that doesn’t work.

If you are unable to switch between the AC and furnace, the reset button may come in handy. There are typically “cool” and “heat” buttons on HVAC systems. The AC should turn on when the first button is pressed, and the furnace should turn on when the second button is pressed. You might want to press the reset button if your HVAC system doesn’t switch.             Remember that in order for the button to function, you might need to press it firmly.

What are the signs of a thermostat not working?

Heat is one of the first signs that your thermostat is having problems. Sometimes, thermostats on cars become corroded or become rusted, and as a result, the thermostat will not let coolant flow through to the radiator. If this happens, the engine will overheat and cause serious damage to the components. If the engine thermostat is not set properly, coolant will get trapped in the radiator and the engine can not cool itself properly. The result will be that the engine can do very serious damage.

If your engine is overheated, it will also cause severe damage; this is because the thermostat is stuck open, preventing the engine from cooling. Overcooling occurs when an engine does not get to the correct temperature for it to function normally. In such a situation, the engine coolant suddenly flows out of the radiator when the engine is started, causing short engine life.

Why is my Honeywell thermostat not communicating?

Try these things: Ensure that your app is current and that your phone is 3 to 5 feet from your thermostat. Restart your mobile device and disable any security-enhancing applications, such as VPNs and GPS spoofers. When the thermostat connection is complete, these can be turned back on.

In order to make sure that another network is not connecting automatically, turn on “Airplane Mode” and then go to your phone’s Wi-Fi settings and forget other networks. Check the Honeywell Home app settings on your phone and confirm that all permissions are set to “always on.” Once the connection and registration are complete, they can be changed. Check the Wi-Fi settings on your phone for a setting that would enable your phone to automatically switch to the “best” network.

What problems can a faulty thermostat cause?

Some people turn toward trained mechanics when they need help, but it is cheaper to repair things by doing it in your own garage. Any tricky part of a car is easily solved by simplifying it, and simply breaking it down into easy-to-follow steps.

Why is my thermostat not turning on my heating?

Check to see if the switch is on. Additionally, check the electrical panel inside your home to make sure the breaker that powers your heating system is turned to the “On” position. Check your thermostat to make sure it is in the “Heat” or “Auto” position.

One of the main causes of a gas furnace not starting is a dirty or malfunctioning pilot light. Many people will leave this problem to the experts, but if you are skilled in mechanics, you might feel confident taking care of the problem yourself.

If your furnace won’t turn on, the problem might be that the fuel supply is inadequate. Make sure the gas control valve is in the “On” position by simply checking it.

(Visited 22 times, 1 visits today)

Max Anthony

Mainly Max Anthony is an athletics tutor & lives in Texas but that's not it. He's is also a music producer, content creator, record producer, writer, and session musician. He has been producing music and engineering at a lower level for over 5 years. His passions include quality music gear and that's what he loves to write about on HifiBeast. ( Shoot him an email now )