Blink Camera Blinking Red – How To Fix

By Max Anthony •  Updated: 03/26/23 •  8 min read

Blink Camera Blinking Red

If the battery starts to die, the flashing red LED on the LCD screen of your camera is about as loud as the clicking blue light on your computer. Always have 2 new, AA batteries (not rechargeable) in the camera. If there is still a red light on your camera, try turning it off and connecting the camera to the internet.

A light that appears on Blink Minis that indicates that the camera is disconnected from the internet. After unplugging and connecting the Mini camera, the red LED on the front of the camera changes colors to a solid green light and then a blue light blinks to show that it is now connected to the internet. When a Mini camera is plugged in and plugged into your network, a red light on the front of the camera displays solid blue and blinks red as the camera tries to reconnect.

Tech Support 24/7
Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

Mini cameras do not start blinking colors on the front of the camera if you do not want it to be flashed before you connect it to your system. It looks like a red light is flashing at first, but when the timer is clicked, a solid yellow and blinky blue light says that the camera is connected.

When a video link is attempted, the doorbell blinks a red LED on the ring surrounding the button. The LED that flashes red when your doorbell is set up and when you try to access the internet via a router or a Wi-Fi hotspot is to indicate that it is set to reconnect.

Tech Support 24/7
Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

It will blink red if the camera is unable to reach the Wi-Fi network in which you live, and it will continue to blink when it does get connected. The synchronization module in your camera can also be disabled and temporarily disabled in order to prevent flashes.

If you want to take pictures with the Blink camera, and upload recordings to your computer, you need to be able to connect it to the internet. If your Internet connection suddenly stops working, the Blink camera will try to connect to your Wi-Fi network by sending a message to your computer asking to join it.

If it is a red button, use something thin to hold it down, instead of a pin or a thumbtack, and then just hold the button down until the LEDs (green and blue) begin to flash. If there is no change in the camera’s red and blue lights, press the button that indicates the camera has been rebooted. The synchronization module displays a red LED when it detects when the internet is not connected.

  1. The Blink Mini’s bottom has a reset button, which you should press and hold.
  2. Go to the settings section of the Blink Mini you just reset in the Blink app.
  3. Choose “Change Wi-Fi.”
  4. Choose “Discover device.”
  5. Select “Join” if a pop-up menu appears.
  6. When prompted, enter the password and select “Join”.
  7. When the Blink app notifies you that “Mini camera changed Wi-Fi,” click “Done.”

Blink Camera Blinking Red

If you see a red light flash on your Blink Outdoor Camera, it means that your camera cannot access the internet or that the battery in it needs to be changed. Red blink lights on your camera are often cause for concern when it is connected to the internet, but in this case, there is usually a quick fix to it. While the camera can flash red when connected to the internet, it will not allow you to view videos. There is a way to easily fix this problem.

When you first install your outdoor camera, you will have to connect to an internet connection. Your camera won’t function if there is no internet connection, and if there is no internet connection, the camera won’t be able to record any video.

If it hasn’t stopped working after being plugged in for ten minutes, check if other devices in your home are also blinking red or if anything has changed in your internet connection. You should also look for devices that are connected to the Internet, like TVs and computers, and see if any of them has a problem.

If the camera is showing a bright blue light, it is because the camera is fully functional and is connecting to the internet and to the intranet easily. If the camera’s green LED lights up when it connects to the internet, there is likely a problem with the camera’s internet connection.

Some devices will stop responding when they become disconnected from the internet and start to light up green. Most of the time, a problem with the network is going on; it could be as simple as a problem with the Wi-Fi network in the area where you live.

Check that all your Wi-Fi devices are plugged in, and that any power is re-entering your home. If everything is fine, it could be that your blinking camera is a little too far away and the signal is weak. If everything is fine, it might be that the camera is too far away or it has a weak signal.

The Sync Module’s red light indicates that there is no internet connection. The lack of dependable internet access is most frequently to blame for the red flashing of Blink security cameras. It’s likely that the red light on your Blink outdoor webcam is simply flashing to inform you that initialization and setup are still being done.

The moment you start the process, a flashing red signal should briefly appear before moving to a blinking green light, a solid blue light, and then a blinking green light notifying you that everything is in order progressing forward.

You are able to set a setting that causes the camera to glow red once it is full and ready for use. If the button is On, there is a glowing light on the front of the camera indicating that it is good to use; a light in the middle of the screen indicates that it is currently inactive. Sometimes when your camera starts to blink, there are a couple of different reasons why it may do that.

It can alarm you when you see your camera blinking, because sometimes you don’t know what the flashing light is telling you. Sometimes there are several reasons why your camera may start to blink.

When it is tried to sync, the Button Video Doorbell blinks a red LED on the ring surrounding the button. If the doorbell flashes a red light when it is trying to start up or when the network is first enabled, the doorbell is connected. If the red light does not turn on or off as it is supposed to, check the battery level in the camera.

When home security cameras become red, it is extremely annoying. Many different reasons can cause your home security cameras to not work properly; they can also be related to the internet. Look at the reasons why your camera may be doing strange things when it changes colors. Wait until you have inserted two new AA Lithium batteries that are not rechargeable. Next, look for a connection on the app you are running.

Blink camera systems do have the option of recording continuously, but you can take or take a photo at any time. And if you don’t have a Bliss Subscription or a cloud-based storage account, Blink cameras will send you Motion Alerts whenever something is motioning near your camera, and when it does, you will be able to access the camera’s Live View. No audio or video is stored, but if you use the Blink app, you are still able to communicate and watch your videos.

The Button Security Camera system automatically records at certain intervals if you move your device within the range of the camera. They are not intended to record every minute. Motion sensors will stay alert as long as your camera is triggered. Users of Blink cameras can also capture live footage by using the Live View feature. This is available with all Blink camera plans.

Although Blink cameras default to not recording, there are some things you need to know when evaluating your setup’s capabilities.

All blink cameras have a maximum motion tracking range of about 20 feet. The app response setting, camera positioning, object size, infrared illumination, and object temperature are some variables that affect motion detection.

The Sync Module should be capable of connecting with Blink cameras up to (and possibly over) 100′ away in any direction, presuming standard construction methods (single building, no abnormally dense construction materials).

Motion can be detected by blink cameras up to about 25 feet away. However, the camera’s ability to reliably detect motion in this range can be impacted by a number of factors, including placement, size of the object, and more.

(Visited 54 times, 1 visits today)

Max Anthony

Mainly Max Anthony is an athletics tutor & lives in Texas but that's not it. He's is also a music producer, content creator, record producer, writer, and session musician. He has been producing music and engineering at a lower level for over 5 years. His passions include quality music gear and that's what he loves to write about on HifiBeast. ( Shoot him an email now )